White PC-ABS

Excellent results with enclosed printers and small to medium part sizes.
Nozzle 280c, bed 110c, preheat to chamber temp ~48c. 16mm3/s. Max vol. Flow rate.
Prints are smooth and buttery with high layer adhesion.
One of the highest impact strength, non-elastomer materials available.
Big and dense parts will warp unless you employ higher chamber temps. Shoot for 60c+ with big parts 150mm+ and reduce part cooling.

Printing with this filament has lead to so many issues that it may seem like a bad material. However, the results are worth the mistakes. Once you can print this material, it results in amazing strength (more strength when printing at below 20mm/s^3) and heat resistance. The only issues I've had with this filament is burning when its at the higher end of recommended temperature (270-280c) and getting it to stick. The ghetto goop seems to work so far.